D4NS-SK01;中文规格书,Datasheet资料.pdf

CSM_D4NS-SK_D4JL-SK_DS_E_2_1 1 D4NS/D4JL-mounting Slide Keys D4NS-SK/D4JL-SK ? Safety-door Switch attachments fit doors on aluminum frames as small as 20 mm2 and frames that are large enough to enclose robotics. ? Shortens the lead time for Safety-door Switch mounting design. ? Enables applications in compliance with ANSI/RIA U.S. robot standards. (Excluding the D4NS-SK01.) Configuration Features Mounts directly to 20 x 20 mm aluminum frames. Be sure to read the “Safety Precautions” on page 9 and the “Precautions for All Safety Door Switches”. D4NS-SK01 Note: Safety-door Switches are sold separately. Ideal for 20 x 20 mm aluminum frame doors D4NS 1-conduit type (sold separately)D4NS-SK01 Can be mounted directly to a 20 x 20 mm aluminum frame. Note: The D4NS-9AF Safety-door Switch (with M12 connector) is sold separately. Can be mounted directly to a 20 x 20 mm aluminum frame. Release door lock.1 Open door.2 Close door.3 Lock door.4 Note: Assess risk before implementing safety measures for the equipment. / D4NS-SK/D4JL-SK 2 Configuration Features ? The L-shaped key guard prevents the Key from being damaged, and helps to guide the Key in smoothly. ? When the door is opened, the key hole can be covered by the disable-prevention cover, and a padlock can be attached. The operators safety is then assured because the door cannot be closed until the padlock is removed. . ? The operation display window lets you visually confirm that the Key has been inserted. ? Magnetic catches prevent the door from opening if the operator accidentally bumps into it. D4NS-SK30 ANSI/RIA R15.06-1999 8.4 Protection of personnel within the safeguarded space Personnel required to perform tasks within the safeguarded space shall be protected by: a) Preventing the re-initiation of any motion or hazardous process while personnel are within the safeguarded space, for example locking a gate open; For safety measures on large doors D4NS 1-conduit type (sold separately)D4NS-SK30 Ope