Hi-VacModel875.PDFVIP

R Hi-Vac ? Model 875 I. General The Hi-Vac ? Model 875 is a heavy-duty industrial vacuum loader consisting of a powerhead, material collection hopper, support frame and airlift. The Hi-Vac? Model 875 is an ideal industrial vacuum source to power permanent in-plant piping systems. II. Power Module The Hi-Vac ? Model 875 is electrically powered and features a 75 horsepower, 480 VAC, 3 Phase, 60 Hz, TEFC, electric motor. A NEMA 4 control panel is provided with all necessary controls and motor starters. All Hi-Vac ? units feature a positive displacement rotary lobe type vacuum producer with ductile iron impellers and high temperature seals. A cast aluminum flap on the vacuum pump discharge silencer acts as a check valve to prevent the vacuum pump from reversing direction and pressurizing the system. III. Material Collection Hopper The Hi-Vac ? Model 875 features a large 1.5 cu. yd. (1.15 cu. m.) capacity main material collection hopper. The hopper is constructed of reinforced carbon steel and is designed to handle negative pressure over 18 Hg. The collected material enters the hopper through the centrifugal separator located at the side of the powerhead. The centrifugal action of the air as it enters the hopper assures that only the finest particles get carried into the linear separator and the baghouse for final separation from the airstream. IV. Air Lift The Hi-Vac ? Model 875 is equipped with an air lift device to raise the Power Module from the Material Collection Hopper allowing the hopper to be removed for emptying. The Air L