--快速设计与表现任务书(holesolid)[中英对照].docVIP

作业 “洞口”与实体  PAGE 3 作业 “洞口”与实体 一：任务描述 原料：一个40MX10M20M的白色实体 动作1：在这个白色实体上穿透一个截面5MX5M的洞。 动作2：再在这个白色实体上穿透一个截面10MX5M的洞。 穿洞原则：必须穿透实体 笔直贯穿，不得转弯 转换：将穿洞后得到的实体转换为建筑 转化原则：建筑表面不得再出现其他在视觉上干扰对“实体”及“洞口”进行阅读的元素 洞口可以用玻璃封闭 建筑功能自定，环境抽象为无限大硬质地面（不得出现其他虚构环境） 建筑结构合理 二：图纸要求 所有图纸以清楚、准确表达设计为目标，图纸内容、比例不做限制 如有设计说明，必须在500字以内 所有透视应该准确 所有图纸都应精确解释建筑，不得出现描写感情的笼统的想象图 文字书写清晰 三：评判原则 “实体”与“洞口”关系清晰性，即建筑内部空间效果 建筑功能与空间关系的搭配程度 开洞的难度，以及化解困难的策略 任何与主体无关的细部、手法影响成绩 时间：1周 HOLE AND ENTITY I Description of the MISSION 1. Material: A White Entity 40MX10MX20M 2. Action1: penetrate a Hole of 5MX5M with section scale through the Entity 3. Action2: penetrate a Hole of 10MX5M with section scale through the Entity Principles of Penetrating: MUST PENETRAE THROUGH THE ENTITY MUST PENETRAE THROUGH STRAIGHT IN THE ENTITY, DONOT CURVE 4. Transit: take the Entity with the Hole to be an Architecture Principles of Transiting: ANY interference elements is permitted on the surface of architecture, especially the element is disturbing the understanding of the “Entity” and “Hole” FUNCTION IS UNLIMITED, AND ENVIRONMENT IS INFINIELY HARD-GROUD (THERE SHOULD NOT BE THE OTHER SURROUNDING) REASONABLE ARCHITECTURAL STRUCTURE II Requirement for the Drawings All drawings must be clearly and correctly express the design concept, substance and scale is unlimited If there is a design specification, must within 500 words Perspective should be correct All drawings must be explain the architecture precisely, DONOT inscribe the vague images of feeling Clear and precise writing III Decision Principles 1. Clarity of the relationship between “Entity” and “Hole”, that’s spatial of architectural interior 2. Combination of the relationship between the function and space 3. The difficulty to open the “Hole”, and the strategy to solve the difficult 4. All uncorrelated details and skill should be influenced the final score Time: 1 week