AMC1200隔离运放.pdf

0 V 250 mV 2.55 V 2 V 1.29 V 2 V 5 V 3.3 V GND1 GND2 VDD1 VDD2 VOUTP VOUTN VINP VINN AMC1200 SBAS542 –APRIL 2011 Fully-Differential Isolation Amplifier Check for Samples: AMC1200 1FEATURES DESCRIPTION The AMC1200 is a precision isolation amplifier with 2? ±250-mV Input Voltage Range Optimized for an output separated from the input circuitry by a Shunt Resistors silicon dioxide (SiO 2 ) barrier that is highly resistant to ? Very Low Nonlinearity: 0.075% max at 5 V magnetic interference. This barrier has been certified ? Low Offset Error: 1.5 mV max to provide galvanic isolation of up to 4000 V PEAK according to UL1577 and IEC60747-5-2. Used in? Low Noise: 3.1 mVRMS typ conjunction with isolated power supplies, this device? Low High-Side Supply Current: 8 mA max at prevents noise currents on a high common-mode 5 V voltage line from entering the local ground and ? Input Bandwidth: 60 kHz min interfering with or damaging sensitive circuitry. ? Fixed Gain: 8 (0.5% accuracy) The input of the AMC1200 is optimized for direct connection to shunt resistors or other low voltage? High Common-Mode Rejection Ratio: 108 dB level signal sources. The excellent performance of? 3.3-V Operation on Low-Side the device supports accurate current control resulting ? Certified Galvanic Isolation: in system-level power saving and, especially in – UL1577 and IEC60747-5-2 Approved motor-control applications, lower torque ripple. The common-mode voltage of the output signal is– Isolation Voltage: 4000 VPEAK automatically adjusted to either the 3-V or 5-V– Working Voltage: 1200 VPEAK low-side supply. – Transient Immunity: 10 kV/μs min The AMC1200 is fully specified over the extended ? Typical 10-Year Lifespan at Rated Working industrial temperature range of –40 °C to +105 °C Voltage (see Application Report SLLA197) and is available in the SMD-type, gullwing-8 package. ? Fully Specified Over the Extended Industrial Temperature Range APPLICATIONS ? Shunt Resistor Based Current Sensing in: – Motor