Design of Fault Diagnosis Testing Centre for Electronic Control Engine.pdf

The Eighth International Conference on Electronic Measurement and Instruments ICEMI’2007 Design of Fault Diagnosis Testing Centre for Electronic Control Engine Zhao Shupeng Zhang Shifang Fang Ping Wang Ye (Agricultural University of HeBei, Bao Ding,China,071001) Abstract: The engine test setting was the core of the fault diagnosis centre for Electronic Control Engine. Its function included the display of engine running condition, independent setup of engine fault, diagnosis with instrument and Diagnosis Expert System. The engine synthesis analysis instrument can measure engine parameter, collect dynamic signal waveform at real time for On-line diagnosis. Automobile diagnosis computer has function of fault code and stream readout, system test, action test. By its four channels oscillograph function, all kinds of signal waveform can be collected at real time. Comparing it with standard waveform, fault cause reason was confirmed by Pattern recognition method. Character of the Electronic control engine was considered in Diagnosis Expert System. By utilizing self diagnosis and Diagnosis Tree method and Waveform Analysis method, fault orientation became more convenience. Keywords: Electronic Control Engine, instrument, fault diagnosis ,self diagnosis, Expert System 1 Instruction Along with the extensive application of Electronic Control Engine on the modern automobile, its fault diagnosis technique developed. The Electronic Control Engine’s fault was usually complicated, which demanded professional diagnosis knowledge reasoning to match with advanced instrument test. Therefore the exploitation of the Electronic Control Engine’s fault diagnosis centre was necessary. The core of the Electronic Control Engine’s fault diagnosis centre was the engine test setting, performance test and fault diagnosis of engine was achieved by kit instrument. The Electronic Control Engine’s fault diagnosis centre has thre