DS-0002_1W_PK2N-1LxE_v1.4.pdf

We Provide the Light to the world No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Taiwan (R.O.C.) Tel ：+886-3-461-8618 Fax ：+886-3-461-8677 2014/03 DS-0002 ProLight PK2N-1LxE 1W Power LED Technical Datasheet Version: 1.4 Features ?100% foot print compatible with Cree XP-C / XP-E / XP-G ?Best thermal material solution of the world ?Best Moisture Sensitivity:JEDEC Level 1 ?RoHS compliant Main Applications ?Entertainment Lighting ?Commercial Lighting ?Indoor Lighting ?Outdoor Lighting Introduction ?ProLight Phenix 3535, is one of the smallest high power LED footprint available by ProLight Opto, has offered extended solid-state lighting design possibilities.ProLight Phenix 3535 is designed with ProLight own Patents and using copper leadframe, the best thermal material of the world. ?Phenix 3535 qualifies as the JEDEC Level 1 MSL sensitivity level and suitable for SMD process, Pb_free reflow soldering capability, and full compliance with EU Reduction of Hazardous Substances (RoHS) legislation. We Provide the Light to the world No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Taiwan (R.O.C.) Tel ：+886-3-461-8618 Fax ：+886-3-461-8677 單色) Emitter Mechanical Dimensions 2 Notes: 1. The cathode side of the device is denoted by the chamfer on the part body. 2. Electrical insulation between the case and the board is required. Do not electrically connect either the anode or cathode to the slug. 3. Drawing not to scale. 4. All dimensions are in millimeters. 5. Unless otherwise indicated, tolerances are ± 0.10mm. 6. Please do not solder the emitter by manual hand soldering, otherwise it will damage the emitter. 7. Please do not use a force of over 0.3kgf impact or pressure on the lens of the LED, otherwise it will cause a catastrophic failure. *The appearance and specifications of the product may be modified for improvement without notice. We Provide the Light to the wo