- 1、本文档共8页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
High strength bolts, VDI2230 - keys
1 / 8 23. Oktober 2008
KISSsoft Tutorial:
Bolt selection and rating according to VDI guideline 2230
__________________________________________________________________________________________
For release 10/2008
kisssoft-tut-004-E-bolts.doc
Last modification 23.10.2008 16:48:00
__________________________________________________________________________________________
1 Starting KISSsoft
1.1 Starting the software
Start KISSsoft using ?Start/Program Files/KISSsoft 10-2008/KISSsoft?. The following window
will appear:
Figure 1.1-1: Start KISSsoft, KISSsoft main window.
1.2 Select Calculation
Using the Module tree window Tab ?Modules?, select the bolt analysis:
Figure 1.2-1: Selecting Calculation Module ?Bolts?.
KI
SS
so
ft
Tu
to
ria
l 0
04
: B
ol
t s
el
ec
tio
n a
nd
ra
tin
g a
cc
or
di
ng
to
VD
I g
ui
de
lin
e 2
23
0
2 / 8
2 Calculation of a flanged connection
2.1 Task description
Sizing and rating of the bolting for a flanged coupling with data as shown:
Torque to be transmitted 13kNm
Pitch diameter 258mm
Number of bolts on pitch circle 12
Material flange (left/right) GG25/34CrNiMo6
Thickness flange(left/right) 22mm/18mm
Surface flange (left/right) N7/N8
Coefficient of friction 0.15
Minimal axial force 0kN
Maximum axial force 10kN
Strength class of bolt 10.9
Hexagon head screw with shank (AB)
ISO4014
Tightening: with dynamometric key
The connection realised with through bolts (notation according VDI 2230:2003 bolted joint)
with nuts and washer under nuts and under bolt head.
This basic data is entered as follows:
Figure 2.1-1: Input of known data, selection of calculation method.
2.2 Proposal for a sensible bolt diameter
After having defined the loads acting and the type/strength of the bolt, the sizing button can be
used in order to have the software proposing a suitable bolt diameter. This proposal is based on a
simplified method as described in VDI guideline 2230, table 7.
文档评论(0)