分粒特性试験装置.ppt

β Attenuation MethodPM10/2.5 Automated Dichotomous Monitor Model SPM-613D Features Ambient PM2.5, or fine fraction is what medical and epidemiological researcher are concerned about for health effects Ambient PM10, PM2.5 and Optical Black Carbon can be measured simultaneously on continuous basis. PM Coarse is calculated and reported as PM10 - PM2.5 = PMC Use of virtual impactor enables two measurements of both Fine and Coarse particles simultaneously with a Japan patented system* Monitor uses proprietary fluorocarbon membrane filter which reduces gas and moisture effect to minimum, and assures high sensitivity Sample spots on fluorocarbon membrane filter useful for analyses of ion components and metal components after mass and Carbon direct measurement Structure of SPM-613D Virtual Impactor PM10 and PM2.5 Simultaneously Validation and Calibration Device for Particle Size-Cut Testing Particle generator and aerosol mixing chamber to test inlet separators and virtual impactors for size-cut and penetration curves * SPM continuous particulate analyzer developed by joint patent with Japan Science and Technology department of government, Kimoto and Tisch Environmental Black Carbon feature originated from work of DRI/EPA and measurement of OC/EC Cut off curves Fig. 1 Comparison of Virtual Impactor vs WINS Impactor. (1-hour value) Fig. 2. Comparison of SPM-613D vs EPA FRM sampler. (24-hour average) WINS vs. VI and FRM vs. Continuous Fig. 3. Comparison of GRIMM, TEOM (at 50 ℃ controlled) vs SPM-612D. (- hour value) Fig. 4. Comparison of EC by DRI method vs OBC by SPM-613D. (1-hour value) Fig.5. A daily plot of continuous ambient PM measurements Element analysis Time series Chemical Compositon Gas and Particles N S Winter Time Series/Chemical composition Summer Time series/Chemical compositoin Sampling time comparisons 写真は、弊社屋上で３台の並行試験を行ったときの写真で、筐体は屋外型キュービクル型となっています。 ■医学?疫学的研究で重要視されているPM2.5/TSP及びブラック?????の同時測定が可能 ■PM2.5サンプラでは得られない時間変動値の測定が可能 ■バーチャルイ