基于PLC与组态王的升降横移式立体车库设计.docVIP

江苏可以大学本科毕业设计（论文）  PAGE \* MERGEFORMAT II 本 科 毕 业 设 计（论文） 学 院 电气与信息工程学院 专 业 电气工程及其自动化 学生姓名 班级学号 指导教师 周瑜 二零一三年六月 PAGE \* MERGEFORMAT 34 **************** 基于PLC与组态王的升降横移式 立体车库设计 Design of up-down and Translation Stereo Garage Based on PLC and Configuration Software  摘 要 本文设计了一个三层七车位升降横移式立体车库的自动控制和监控系统。它以可编程控制器(PLC)为控制核心，电机为升降横移动力，完成对升降和横移的准确控制，并通过组态软件设计监控系统和PLC之间建立通信，可以实现上位机对现场状况实时采集和远程控制功能。最终实现一种多通道、多层次的存取车的方式。 通过对升降横移式立体车库的工作原理和控制过程的研究，探讨以西门子S7-200型号PLC控制立体车库的存取车过程的方法，实现3x3立体车库的存取车模型设计和控制系统设计。监控系统是基于WINDOW平台的组态软件组态王。通过组态软件建立数据词典、设计监控界面、动画连接、控制脚本编写、数据采集，在与PLC通信的基础上进行调试，完成组态监控系统的设计。实现PLC和组态监控对立体车库的人机分离操作和双向控制的系统。完成对升降横移式立体车库的自动存取车功能、升降横移系统、组态监控系统和安全防坠挂钩功能等的实现与模拟。 关键字: 立体车库；西门子PLC；升降横移；组态王 Abstract This paper presents a three-dimensional lifting and transferring seven parking garage automatic control and monitoring systems. It is a programmable controller (PLC) to control the core motor for the lifting and transferring power to complete the lifting and traversing accurate control and monitoring system via the configuration software design and establish communication between the PLC can be achieved on the host computer site conditions real-time acquisition and remote control functions. Ultimately achieve a multi-channel, multi-level access car approach. By lifting and transferring garage working principle and control process study to look at the Siemens S7-200 PLC control model car stereo garage access process methods to achieve three-dimensional garage access 3x3 car model design and control system design . The monitoring system is configuration software that is kingview based on WINDOW platform. Through the configuration software to establish data dictionary, the monitoring interface design, animation, the control script, data acquisition, debugging based on communication with PLC, completed the design of configuration m