热轧设备组成学案.ppt

2004.8(rev.0);热轧设备布置图(HSM Layout) 加热炉入口设备(RF entry equipment) 加热炉(Reheating Furnace) 高压水除鳞设备(Primary descaler) 粗轧机(Roughing mill with edger) 飞剪(Crop Shear) 炉卷轧机(Steckel Mill) 层流冷却(Laminar strip cooling) 卷取设备(Down coiler) 辊道(Roller Table) 钢卷传送设备(Coil Conveyor) 磨辊间(roll shop) 空压机（air compressor) 水处理(Water treatment) 行车(Crane ) 自动化系统(Automation) ;;Reheating furnace entry equipment;;Slab receiving roller table;Reheating furnace;;Type: walking beam type output：200t/h Slab discharging temp.：1200℃-1250℃ Furnace width：13.6 m Furnace length：36 m Fuel ：Natural Gas;;Roughing Mill with Edger;Technical data: type：top drive Rolling force：Max.588ton Roll speed：Max. 350m/min Roll opening：780~1850mm Roll dia：916~1015mm Screw down：electro-mechanical Driven motor：2-900KW;;Work roll and backup roll cooling system: 1.7Mpa cooling water for WR 0.4Mpa cooling water for BUR Descaling system: entry delivery side flow rate:2000L/min x 14 header Roll changing system: WR changing:automatically Changing time:less than 10 minutes BUR changing:manually Changing time:1hr Fume exhausting system: Type:water scrubber type Capacity:90000m3/hr Outlet dust:less than 50mg/m3;Technical data: Type：Drum rotary type Cutting conditon: temperature:Min 900 bar thickness:Max.32mm bar width :1600mm Cutting speed:150~250m/min Cutting force:1000t Drive motor:1-AC1300KW;Steckel Mill;Technical data: Coiling thickness:Max. 25mm Coiling speed:Max. 850m/min Furnace temp’:900~1200 Normal temp’:930~980 Fuel: Natural gas Burner:7-291kw/furnace Ult