各国插头插座标准探讨与解析1选编.pptVIP

各国插头插座标准探讨;主要内容：;法国;与IEC60884-1标准差异（法国）;与IEC60884-1标准差异（法国）;与IEC60884-1标准差异（法国）;与IEC60884-1标准差异（法国）;BS1363英国插头插座标准差异;BS1363-1与IEC60884-1标准主要差异;BS1363-1与IEC60884-1标准主要差异;BS1363-1与IEC60884-1标准主要差异;BS1363-1与IEC60884-1标准主要差异;BS1363-1与IEC60884-1标准主要差异;各国插头插座耐热差异比较;澳大利亚/新西兰插头插座与IEC差异;AS/NZS3112插头插座标准与IEC差异;AS/NZS3112插头插座标准与IEC差异;AS/NZS3112插头插座标准与IEC差异;AS/NZS3112插头插座标准与IEC差异;AS/NZS3105插头插座标准与IEC差异;I have checked with the Chairman of the Australian test laboratory association and I understand that it has been agreed that the requirement for insulating material in AS/NZS 3105 clause 4.3, item (a) [viz 60℃ per AS/NZS 3121] overrides the requirements for insulating material of AS/NZS 3112 called up by AS/NZS3105 clause 4.5.1.1, item (a). Thus the socket-outlet part(s) of EPODs need only meet the 60℃ requirements of AS/NZS 3121. I understand this decision is based on EPODs being portable devices with internal overload protection and hence it is considered that they don’t need the higher temperature rating required for fixed socket-outlets. I hope this resolves your question. Regards Geoff Webb Projects Manager EL-004 Electrical Accessories;IEC60799电线组件;某合格2.5A连接器结构图;UL1363 Relocatable Power Taps标准解析与常见不合格项分析;;电源线与内部导线未钩焊;电源线与内部导线未钩焊(续);§31.4低温冲击试验不合格;§31.4低温冲击试验不合格;标志问题;标志问题(续);标志问题(续);标志问题(续);UL1363国家局文件要求试验;软线固定装置举例;UL817电线组件与电源线;双芯平行型电线组件;主要问题（极性连接）：;主要问题（警告标签字母高度）：;主要问题（插头本体尺寸）：;主要问题：;主要问题（连接器尺寸）：;密封盖要求（国家局文件）：;密封盖要求（国家局文件）;密封盖要求（国家局文件）;纸卡也是电线组件的一部分：;国家局文件要求的试验部分;张力消除试验装置举例;;国家局文件要求的试验部分;试验设备举例（力可通过推力计或静砝码施加）;UL498A电流插座与转换器;谢谢大家！