无线协作通信的仿真与性能分析40协作策略41论文说明书.docVIP

 PAGE \* MERGEFORMAT 6 (此文档为word格式，下载后您可任意编辑修改！) 毕业设计说明书(论文) 题 目： 无线协作系统的仿真与性能分析 （协作策略）  Wireless Cooperative Communication system simulation and performance analysis A Dissertation Submitted to Nanjing Institute of Technology For the Academic Degree of Bachelor of Science By Sen Lin Supervised by Lecturer Jie Yang College of Communication Engineering Nanjing Institute of Technology June 2013 摘要 为了满足人们对无线多媒体通信业务不断增长的需要，协作通信技术应运而生。本文研究了无线协作通信中的部分协作策略。其中比较主流的是放大转发（AF）和解码转发（DF）。本文首先分析了不同协作策略的工作原理，然后利用MATLAB来仿真了不同信噪比下AF和DF协作通信系统的误码率性能。从???真结果可以对以下一些问题进行判断：在不同信道条件下，AF、DF和传统的直连方式相比优势在哪里，缺点在哪里。通过比较相同的信噪比条件下不同传输方式的误比特率以及功耗等参数可以判断一种无线通信方式的优劣，而这次研究，就是要运用MATLAB软件，来完成对不同协作策略以及不使用协作情况下的通信效果的仿真，从而得以判断不同通信方式的好坏，加深对自身专业的了解。本文的研究成果，可以为无线通信系统的建模和设计提供理论依据。 本论文的主要内容包括：无线协作通信原理；协作通信中不同协作策略；MATLAB仿真流程，用MATLLAB编程实现无线协作通信系统仿真。 关键词： 协作通信；放大转发；解码重传；误码率  Abstract In order to satisfy peoples growing wireless multimedia communication service needs, collaboration, communication technology emerged. This paper studies the wireless cooperative communications collaboration strategy. Which is amplified more mainstream forwarding (AF) and decode forward (DF). This paper analyzes the different collaboration strategy works, then use MATLAB to simulate the amount of different SNR AF and DF cooperative communication system BER performance. From the simulation results can be seen: is to compare different channel conditions, AF, DF, and compared to the traditional straight edge where shortcomings where the same SNR different transmission bit error rate and power consumption and other parameters to judge the merits of a wireless communication system the major parameters of this study is to use MATLAB software to complete collaborative strategies for different circumstances and without the collaboration of the communication results of the simulation, so that it can determine the different comm