QNX快速入门指南.pdfVIP

10 STEPS TO YOUR FIRST QNX PROGRAM QUICKSTART GUIDE Second Edition QNX QUICKSTART GUIDE A guide to help you install and configure the QNX Momentics tools and the QNX Neutrino operating system, so you can start developing right away! 1 Requirements 2 Installing the QNX Momentics Development Suite 3 Installing the QNX Neutrino RTOS 4 Networking with QNX Neutrino 5 Creating a Program Project 6 Communicating with QNX Neutrino 7 Compiling and Linking 8 Preparing to Launch the Program 9 Starting and Debugging 10 Making the Program Your Own 1 Requirements To write programs that run under the QNX? Neutrino? realtime operating system (RTOS), the first thing you need is the QNX Momentics? development suite. You can install it on Windows 2000, Windows XP, Linux, or Solaris, or as a self-hosted QNX Neutrino system. If you don’t have a QNX Momentics CD, you can download an ISO image of it from: /products/eval In addition to a development system, you also need a target platform that runs the QNX Neutrino RTOS itself plus all the programs you’re going to develop. To become familiar with QNX Neutrino, you have two choices: either install QNX Neutrino as an operating system on a normal PC, or run QNX Neutrino on a reference platform, a reference design made by a CPU vendor (e.g. with a PPC, XScale, or SH4 CPU). Since QNX Neutrino is designed the same way for all platforms and is used the same way, for this Quickstart guide we’ll use the PC installation. If instead you want to use a reference platform, you need a Read the QNX Board Support Package for this platform.