木门安装十大步骤.docx

嘉盛木门：木门安装十大步骤 10 steps to install a wooden door 发布时间：2016-08-10 作者：嘉盛木门SEO 10 steps to install a wooden door 木门安装十大步骤 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101022472247.jpg" \* MERGEFORMATINET  Intall the frame body firstly, ?then use the tapping screws to fix the joint of two sides and the top. 将门框主体先组装好， 用自攻螺丝把两侧部件和顶部部件连接起来，形成一个整体。 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101023112311.jpg" \* MERGEFORMATINET  Put the frame body into wall hole, insert the wooden wedge into the gap between ?wall and frame to keep the frame stable. 将组装好的门框主体置入门洞中，用木楔塞紧。 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101023272327.jpg" \* MERGEFORMATINET  Use the perpendicular line to ?check whether it is vertical. 用线坠调整好门框的垂直度， 木楔加固。 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101023452345.jpg" \* MERGEFORMATINET  Use the edge trimmer to drill the hinge hole , and tighten the screws. 用修边机（小锣机）开好门扇合页，上好螺丝。 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101023592359.jpg" \* MERGEFORMATINET  Put the wood pieces to the bottom of the door leaf , make it stand beside the frame, adjust the height. Then draw the hinge rabbet on the frame, and rabbet it. Finally fix and tighten the screws. 将门扇用木尖垫底， 靠在门框上，调整好高度，在门框上画上合页槽位，用修边机（小锣机）开好合页槽。 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101024142414.jpg" \* MERGEFORMATINET  Recheck to assure the frame and door are vertical and match well. Use holders to support . 重新检查调整门扇与门扇的配合度及垂直度后，用木撑或者撑杆进行支撑。 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101024292429.jpg" \* MERGEFORMATINET  Apply the polyurethane foam to the gap.To make the door stable , please do not move it in 4 hrs. 在门框与门洞的缝隙处注入发泡胶， 注胶后4个小时不能受外力影响。 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101024432443.jpg" \* MERGEFORMATINET  Drill the lock hole , install the lock and door stopper. 开锁孔，安装锁具、门吸。 INCLUDEPICTURE \d "/uploadfiles/2016/08/201608101025312531.jpg" \* MERGEFORMATINET  Install the architrave. 安装门套线。 INCLUDEPICTURE \d "/uploadfiles/2016/