unit8 磨削综述.pptVIP

Professional English ;Unit 8 Grinding ;Generally, grinding is considered to be a finishing process that is usually used for obtaining high-dimensional accuracy and better surface finish. Grinding can be performed on flat, cylindrical, or even internal surfaces by employing specialized machine tools, which are referred to as grinding machines. 一般而言，磨削被认为是一种通常用于获得高尺寸精度和较好表面光洁度的精加工作业。磨削通过采用被称为磨床的特殊机床能在平面、圆柱面甚至内表面上进行。;Obviously, grinding machines differ in construction as well as capabilities, and the type to be employed is determined mainly by the geometrical shape and nature of the surface to be ground, e.g., cylindrical surfaces are ground on cylindrical grinding machines. 显然，磨床根据结构和功能的不同有所区别，使用何种形式的磨床主要取决于被磨削表面的几何形状和物理性质。例如，圆柱面在外圆磨床上磨削。;Type of Grinding Operations磨削作业的类型;In the first case (horizontal spindle), the machine usually has a planer-type reciprocating table on which the workpiece is held. However, grinding machines with vertical spindles can have either a planer type table like that of the horizontal-spindle machine or a rotating worktable. 在第一种情况(卧式主轴)，卧式磨床通常具有安装工件的刨床式往复工作台。而立式主轴磨床既可以像卧式主轴磨床那样具有刨床式工作台也可以具有旋转工作台。;Also, the grinding action in this case is achieved by the end face of the grinding wheel (Fig.8.1b), contrary to the case of horizontal-spindle machines, where the workpieces ground by the periphery of the grinding wheel. 而且在这种情况下，磨削动作是通过砂轮端面完成的(图8.1b)，这与通过砂轮周边磨削工件的卧式主轴磨床正好相反。;Fig.8.1a and b also indicate the equations to be used for estimating the different parameters of the grinding operation, such as the machining time and the rate of metal removal. 图8.1a和b同时简述了用于估计诸如加工时间和金属去除率之类的磨削作业不同参数的方程式。;During the surface-grinding operations, heavy workpieces are either held in fixtures or clamped on the machine table by strap clamps and the like, whereas smaller workpieces are usually held by magnetic chucks. 在平面磨削时，重的工件用夹具固定或用压板等夹紧在磨床工作台上，而小的工件则通常是用电磁卡盘固定的。;2. Cylindrical grinding. In cylindrical grinding, the workpiece is held betw