基于液态脂光固化(SLA)快速成型机设计.docVIP

黑龙江工程学院本科生毕业设计 PAGE  e 题 目 基于液态树脂光固化成型快速成型机设计 学生姓名 ee 学号 ee 所在学院 机械工程学院 专业班级 ee 指导教师 陈建刚 __ ____ 完成地点 ee ___ 2009年5月30日  ee 基于液态树脂光固化成型快速成型机设计 ee （ee） 指导教师：ee [摘要]为了提高液态树脂光固化成型快速成型机的工作效率和成形质量，在对现存液态树脂光固化成型快速成型机机械装置结构研究的基础上，本论文针对其存在的缺陷进行了理论性的分析与优化，提出新的工作机械装置结构，其内容包括：Z轴升???装置和缸体及再涂覆装置，Z轴采用步进电机直接连接滚珠丝杠，响应更加快速准确，同时因无中间部件，使机械结构简单化，精度明显提高，优化了缸体及再涂覆装置采用了传统的刮刀机构，除此之外，还对X-Y扫描装置和电子控制部分进行了改进。 [关键词]快速成型机；升降装置；快速成型；缸体；再涂覆 Design of rapid prototyping machine based on liquid resin ee (ee) Tutor:ee Abstract: In order to improve light-curing liquid resin rapid prototyping machines efficiency and forming quality, in light of the liquid resin curing rapid prototyping machine mechanical device structure based on the research, This thesis aimed at the defects existed in the theoretical analysis and optimization ,and new structure of working mechanism is put forward, which includes: Z axis lifting device and the cylinder and re-coating device, Z axis ball screw directly connected by a stepping motor, the response more quickly and accurately, but because there is no intermediate member simplify the mechanical structure, accuracy is significantly improved, optimized cylinder block and re-coating device to use the traditional scraper, in addition, also on the XY scanning device and an electronic control unit has been improved. Key words: Liquid resin; light-curing; mechanical device; Optimization  PAGE \* MERGEFORMAT 41 目 录TOC \o 1-3 \h \u   HYPERLINK \l _Toc390525953 1.绪论  PAGEREF _Toc390525953 \h 1  HYPERLINK \l _Toc390525954 1.1快速成型技术简介  PAGEREF _Toc390525954 \h 1  HYPERLINK \l _Toc390525955 1.1.1快速成型技术的基本构思  PAGEREF _Toc390525955 \h