利用改进重相干分析改进订标机工况传递路径模型.PDFVIP

第36卷 第3期 噪 声 与 振 动 控 制 Vol 36 No.3 2016年6月 NOISE AND VIBRATION CONTROL Jun. 2016 文章编号：1006-1355(2016)03-0169-05 利用改进重相干分析改进订标机工况传递路径模型 郑启明，钱 静 （ 江南大学 机械工程学院，江苏 无锡 214122 ） 摘 要：工况传递路径分析（OPA）在应用过程中可能存在传递路径遗漏或错误估计问题。为此，以缝纫式订标机为 研究对象，针对其振源之间存在互相关情况，将基于偏相干理论改进重相干分析技术，应用于订标机工况传递路径模型 优化。基于改进重相干分析技术，利用 Matlab 对多输入-单输出工况传递路径模型进行分析，改善重要传递路径被遗漏 情况，确定对目标点输出影响较大的输入信号，剔除次要输入，最终建立起更符合订标机真实系统又相对简化的六输入、 单输出工况传递路径模型，为更深入的工况传递路径分析提供可靠前提。 关键词：振动与波；工况传递路径；重相干；偏相干理论；路径遗漏 中图分类号：TB53 文献标识码：A DOI编码：10.3969/j.issn.1006-1335.2016.03.035 Improvement of the Operational Transfer Path Model of a Label Sewing Machine Using Multiple Coherence Analysis ZHENG Qi-ming , QIAN Jing ( School of Mechanical Engineering, Jiangnan University, Wuxi 214122, Jiangsu China ) Abstract : In application of operational transfer path analysis (OPA), transfer path omission and erroneous estimation may occur sometime. This problem is studied with a label sewing machine as the object. Due to the coherence of different vibration sources, the improved multiple coherence technique based on partial coherence theory is applied to optimize the operational transfer path analysis model of the label sewing machine. Based on the improved multiple coherence technique, the multiple- input and single- output OPA models are analyzed with Matlab. Omission situation of the main transfer paths is improved. The input signals which have important influence on the output at the target points are identified, and the less import