精密搓齿机.PDFVIP

环保型半干式搓齿 Environment friendly semi-dry roll forming 精密搓齿机 PRECISION ROLL FORMING MACHINE PFM-X 系列 环保 通过本公司的半干式刀具与高刚性主机的配合， 实现了半干式搓齿 节能 通过驱动系统电气化、半干式搓齿， 降低了能量消耗 通过NC同步控制实现了高精度搓齿加工 利用2台伺服电机实现左右齿条高精度的NC同步 （滚珠丝杠采用直连方式无间隙结构） 将以往通过垫片进行的相位调整数控化 易于工种变更工作 齿条可移动至易于更换齿条的位置 （更换齿条时的行程延长200mm） 不松齿条压板即可调整OPD尺寸 NC刀座（选项） 实现齿条间尺寸调整NC化 可在同一齿条上加工不同齿数的花键 （直径差在4mm以下不用更换齿条） Friendly to environment Semi-dry roll forming is achieved by NACHI semi-dry forming rack and highly rigid main body. Energy saving Power consumption is reduced by electric power drive and semi-dry rolling. High precision roll forming through NC synchronization Two server motors move rack left and right with high precision NC synchronization (Direct ball screw coupling in a backlash-less construction) Position adjustment conventionally done with CIM is numerically controlled Change-out procedure is easy Rack can be moved to position for easy change-out (Stroke extends to 200 mm during rack change-out) OPD dimensions can be adjusted without loosening rack NC rack holder (option) Adjustment of distance between racks is numerically controlled Possible to work splines with different number of teeth on same rack (Not necessary to change-out rack up to 4 mm diameter difference) PFM-X.indd 1