Lexic0nPCM91简易说明.docVIP

第 PAGE 4页 共 NUMPAGES 4页 1. Headroom 峰值余量 输入信号电平显示 Five-position indicator for analog and digital signal levels and overload conditions. 5位LED显示模拟和数字信号电平及过载状态。2. INPUT 输入 Adjusts analog input level. 调节模拟输入电平。3. Display 显示屏 Two rows of 20 alphanumeric characters display effect names and ID numbers, and parameter names and values. 两排20个字母数字字符的显示屏可显示效果没吃和代码，以及参数名称和参数值。4. ADJUST 调整旋钮 In Edit mode, changes values of parameters chosen with SELECT. With Program Banks or Register Banks selected, behaves as a soft knob for patched parameters. 在编辑模式中，用SELECT旋钮改变所选参数的值。当选择预置库或用户库时，该旋钮为对应参数的软旋钮。  5. SELECT 选择旋钮 Scrolls through presets, registers or parameters. With Program Bank or Register Bank selected, scrolls through the 50 programs in the selected bank, then begins scrolling through the programs in the next bank. With Edit selected, scrolls through matrix parameters. 旋转此旋钮将在预置库P0~P8、用户库或效果参数间滚动。当程序库或注册库被选中时，旋转此钮将在被选效果库的50个程序之间滚动，当滚动到此程序库的最后一个程序时，接着开始下一个程序库。当EDIT编辑按钮按下时，旋转此钮将滚动显示当前程序的各个参数。 7. Program Banks 厂家预置程序库 Enables selection of factory presets. Press repeatedly to cycle selection of 5 internal preset banks and a KeyWord sorted display. Press and hold to display the name and algorithm of the current program. 允许选择厂家预置程序库，重复按此键将循环显示5个内置程序库和关键字排序，按下并保持此键，将显示当前程序的名称和算法结构。6. Up/Down 上下选择键 Press to move up and down through program and register banks, or a parameter matrix. 按向上键Up/向下键Down，选择程序库P0~P8、注册库 或选择效果参数。8. Load/? 加载键 In Program or Register mode, loads the selected program. In Edit mode, scrolls through any multi-field parameter. 在程序库按钮7和注册库按钮9按下时，加载被选的程序。在编辑模式，滚动显示效果参数。 9. Register Banks 用户注册库 Enables selection of user memory. If a RAM card is loaded into the Memory Card slot, each press of this button selects a new register bank. Press and hold to display the name and algorithm of the current program. 允许用户存储器的选择，如果RAM内存卡插入插槽，每按此键将选择一个新的注册库。按住此键并保持数秒，将显示当前程序的名称和算法结构。10. Store 存储键 Initiates register store function. 启动用户注册程序的存储功能。11. Edit 效果编辑 E