高精度压力变送器的设计案例.docxVIP

长春大学 毕业设计（论文）纸  PAGE \* MERGEFORMAT ii 高精度压力变送器的设计 摘要：随着网络技术、信息技术和自动化技术的飞速发展，传统仪表易失控，互换性和可靠性等缺点的不足日益明显，越来越不能满足用户的需求。新的总线型仪表除了能够完成基本的测量功能外，还应具有控制功能和现场总线通信功能。现场总线技术的发展改变了传统控制系统结构，在总线条件下与控制网络相结合，逐渐形成网络集成式全分布控制系统－现场总线控制系统。 本文选用Silicon Labs公司的C8051F系列微控制器和Keller 10系列压阻式压力传感器，开发了一种高精度压力变送器。该压力变送器是通过压力传感器采集信号，再将采集后的模拟信号通过AD7793芯片转换成数字信号，然后传输到单片机进行处理，单片机对采集回来的压力信号进行转换、存储及显示，然后当上位机需要压力变送器所测得的数据时，利用CAN总线技术将单片机的数据发送到上位机进行处理。该压力变送器主要是由压力传感器、模数转换模块、控制模块、稳压模块、存储模块、通信模块等组成。 压力变送器的压力测量精度为0.01~0.03%FS，传感器线性度较高。本文结合C8051F500单片机的低功耗特性和技术要求，提高了系统的可靠性、自治性和灵活性，达到了高精度压力变送器的要求。 关键词：压力变送器；可靠性；现场总线  Design of High Precision Pressure Transmitter Abstract： Along with the network technology, the rapid development of information technology and automation technology, traditional instrument easy out of control, compatibility and reliability shortcoming of increasingly apparent, more and more cant meet the needs of users. New main line instrument in addition to being able to complete basic measurement function, but also has the function of control and field bus communication. The development of field bus technology has changed the traditional control system structure, under the condition of the bus and the combination of control network, gradually formed network integrated total distributed control system, field bus control system. In order to meet with the requirements of field bus instrument, a high accuracy pressure transmitter has been developed. It has exploited the Silicon Labs products: C8051F series microcontroller and Keller 10 series pressure stop pressure sensor. The pressure transmitter is the signal of the pressure sensor, and then the analog signal is converted into digital signal through AD7793 chip, and then transmitted to the microcontroller processing, microcontroller on the acquisition of the back pressure signal of conversion, storage and display and when PC need pressure transmitter the measured data using CAN bus technology will MCU data is sent t