Quality control of blood cell test.doc

 PAGE \* MERGEFORMAT 8 Quality control of blood cell test Accuracy of test results of blood cells of disease diagnosis, treatment and monitoring have a direct impact. Therefore, we must guarantee the quality, do a good job of blood cell analysis before, during and after the quality control. An analysis of quality control Blood Cell Analyzer 1.1 installation requirements to ensure the normal operation of equipment, the installation should pay attention to: 1.1.1 equipment placed in the electromagnetic interference from sources of heat source location; 1.1.2 Place the test-bed to a solid instrument, apparatus, both sides, rear and above the air space of at least 0.5m, in order to ease maintenance and use, between the rear panel and the wall, leave at least 0.2m, in order to ease heat and cleaning work environment must be clean; 1.1.3 moisture, direct sunlight, good ventilation, indoor temperature should be maintained at 15 ~ 30 , the optimum temperature is 25 , relative humidity of 30% to 85%; 1.1.4 For the safety and anti-jamming equipment, apparatus, application of best cleaning power regulator, and a dedicated ground connection standard. Every time after installation or maintenance of equipment, the technical performance of the instrument must be tested, calibration and evaluation. ICSH released a report on the evaluation of blood cell analyzer program, in the determination of cell count and hemoglobin, the test sample to the instrument’s total variability, carryover, linearity, comparability, repeatability, accuracy of evaluation. The total white blood cell count coefficient of variation should be “3% carryover lt;2%, repeatability” 3%, wide linear range, the electrical impedance method should be leukocyte cell classification clustering should pay attention to compliance with the microscopic examination; 1.1.5 calibration of instruments, apparatus or equipment inspection, after repair or replacement parts six months after clin