德国 AZ 标准衬里旋塞阀样本.docVIP

——————————————————————————————————————————————— 德国 AZ 标准衬里旋塞阀样本 ARMATUREN totraumfrei und wartungslosTYPE “Standard A”Plug Valve with chemical resistant, vacuum-proof lining 2.1 cavity free chemical resistant Tmax = 210°C easy accessible adjustment of the plug face to face dimensions acc. to DIN and ANSI Type “Standard A” Plug Valve with chemical resistant, vacuum-proof lining stuffing box ring cover PTFE - silk packing stainless steel - thrust ring PTFE - diaphragm stainless steel - diaphragm PTFE - diaphragm F-2-Standard-Alining The non-porous, extremely resistant lining is achieved by a special production method of AZ-Armaturen.This production method guarantees the exclusion of pores, microcracks and flaking. The thickness of the lining layer is min. 3 mm. Only virginresin granulate is used, no regenerated materialor similar. Designs F-2, F-3-Standard, F-3-W, (F-4, F-5 on request) see leaflets 1.1 - 1.4 also fully jacketed available, see leaflet 1.5 Plug Forms see leaflet 1.3 and 1.4 Sizes DIN DN15 - DN300 ANSI 1/2” - 12” Temperature - Range -40°C to +200°C Ratings max. PN40 or 300lbs vacuum-proof see enclosed P-T-diagramm Safety Sealings In order to achieve an additional safety sealing to the outside for very dangerous fluids, werecommend our special stuffing box designtype “CA-S” (see leaflet 5.4)Face to Face DimensionsDIN and ANSI, see leaflets 1.1 and 1.2JIS and British Standard on request.Core MaterialsBody: ductile iron / GGG40.3, WCB / GS-C25, 1.1138, 1.4408Plug: up to DN100 / 4” = 1.4408 from DN125 / 5” = GS-C25special materials on requestplugs without lining in special materials likeTitanium, Monel, Hastelloy C, ceramics etc.on request.Lining MaterialBody: PFA, PFA-conductive, FEP, PVDFPlug: PTFE, PFA, PFA-conductive, FEP, PVDF Any plug and body materi