P2Pconnection.docVIP

P2P connection With easy QR code settings, you can monitor with smart phones and tablets over the internet from anywhere, anytime. How to setup 1, On your DVR/IVR, please go to Network Setup page: Main control panel = Configuration = Network Setup 2. On lower part of Network Setup page, please input P2P Access Key for P2P and press Apply button. If you don’t have P2P Access Key, please check with your service provider for availability. Please press OK button on lower part of Network Setup page and return to Configuration level. 3. Please go to System Information page: Main control panel = Configuration = System Information Under Network tag, you can find QR code, access key and expiry date for P2P feature. For computer use, please login iWatchDVR. On prompting interface, please input P2P Access Key in Host field, input / modify the rest of fields as appropriate. Click on Connect button. For mobile device (i.e., smart phone and tablet) users, please login APP iWatch DVR2. Click ‘+’ (iOS) / ‘New’ (Android) icon on upper right corner to add a new connection. iOS interface Android interface Click on Scan QR code button as shown on following picture. iOS interface Android interface Please scan QR code on DVR’s System Information page  Access key information will be shown on Host field. iOS interface Android interface Input / modify the rest of fields as appropriate. Click on Save button on upper right corner. Login with new settings. QR Code Expiry date Access key