DatedOctober12,1987.docVIP

Eureka Welding Alloys 2000 E. Avis Drive Madison Heights, MI 48071 Phone: 248-588-0001 Fax: 248-585-7711 Toll Free: 800-962-8560 E-mail: info@ Website: TECHNICAL DATA FOR EUREKA TRI COR N2 FLUX CORED WIRE Dated: March 31, 1995 Revised: July 8, 2013 INTRODUCTION Eureka Tri Cor N2 Flux Cored Wire is a medium alloy filler metal. The wire has a smooth spray transfer arc with a thin slag system that is easily removable. The wire is formulated to develop high quality weld deposits that are porous and crack free. The wire is designed for multi-pass welding which greatly increases productivity. METALLURGICAL CHARACTERISTICS Eureka Tri Cor N2 Flux Cored Wire Electrode is a carefully balanced Molybdenum, Manganese and Nickel alloy that has an as welded hardness of 18-23HRC. This alloy displays high impact resistance and moderate abrasion resistance. The microstructure of ferrite and bainite promotes high crack resistivity. RECOMMENDED APPLICATIONS Eureka Tri Cor N2 Flux Cored Wire is an excellent choice for welding forging components such as rams, sow blocks, die holders, die shanks, hammers bases and columns. It is also utilized in steel mills and in maintenance shops for welding general machine parts such as steel gears, large arbors and shafts. Eureka Welding Alloys 2000 E. Avis Drive Madison Heights, MI 48071 Phone: 248-588-0001 Fax: 248-585-7711 Toll Free: 800-962-8560 E-mail: info@ Website: WELDING PARAMETERS TYPE SIZE AMPERAGE VOLTS Metal Cored Wire .045” 1.2 mm 125 – 225 16 – 28 Metal Cored Wire 1/16” 1.6mm 180 – 400 25 – 33 Flux Cored Wire 1/16” 1.6mm 180 – 400 25 – 33 Flux Cored Wire 3/32” 2.4mm 350 – 600 27 – 35 Flux Cored Wire 1/8” 3.2mm 500 – 900 30 –