Design-ZARWoodFinishingProducts.pdfVIP

Desgi n Steel Door Surf ce Prep r tion Applying the Tone Co t Steel doors come already primed and are usually gray, buff Stir ZAR Wood Stain thoroughly. Wipe on another thin, or white. Whatever the door color, the procedure is the same. uniform coat of the same color ZAR Wood Stain in the direction of the grain pattern. This is For doors previously painted with the tone coat and will give the door dark color paint or for a more natural the rich look of wood. (Do not sand wood appearance, apply a semi-gloss between coats, sanding will damage or eggshell paint as a base coat. the simulated grain pattern). Use a Allow base coat to dry thoroughly. dry brush to gently feather out streaks and lap marks. For best results, lay the door on You can control the darkness of the padded sawhorses. Remove all door by the amount of stain you hardware, clean all dirt, dust and apply. A thin coat will reveal more of greasy stains using a cloth and the gra