Fault Detection and Isolation in Industrial Systems Based on Spectral Analysis Diagnosis.docVIP

Intelligent Control and Automation, 2013, 4, 36-41 /10.4236/ica.2013.41006 Published Online February 2013 (/journal/ica) Fault Detection and Isolation in Industrial Systems Based on Spectral Analysis Diagnosis Ahmed Hafaifa , Mouloud Guemana , Attia Daoudi 1 2 1 Electrical Engineering Field, Faculty of Science and Technology, University of Djelfa DZ, Djelfa, Algeria Faculty of Science and Technology, University of Medea, Medea, Algeria 1 2 Email: hafaifa@, guemana_m@yahoo.fr, attia_daoudi@yahoo.fr Received November 9, 2012; revised December 21, 2012; accepted December 30, 2012 ABSTRACT The diagnoses in industrial systems represent an important economic objective in process industrial automation area. To guarantee the safety and the continuity in production exploitation and to record the useful events with the feedback ex- perience for the curative maintenance. We propose in this work to examine and illustrate the application ability of the spectral analysis approach, in the area of fault detection and isolation industrial systems. In this work, we use a com- bined analysis diagram of time-frequency, in order to make this approach exploitable in the proposed supervision strat- egy with decision making module. The obtained results, show clearly how to guarantee a reliable and sure exploitation in industrial system, thus allowing better performances at the time of its exploitation on the supervision strategy. Keywords: Diagnosis; Spectral Analyzes; Faults Detection and Isolation; Condition Monitoring 1. Introduction perimental test, allowing that the use of the combined time-frequency method give excellent results on the tested models with better performances. The proposed approach, allows the detection of the defects at the beginning of their appearance. The studied approach ensures an effec- tive monitoring, allows detecting the defects to av