AATCC 107-2009 纺织品 色牢度试验 耐水色牢度 耐水色牢度.pdfVIP

AATCC Test Method 107-2009 Colorfastness to Water Developed in 1902 by AP, TCC Commit ing laboratory testing equipment. specimen is more than 3 times its dry tee RA23; revised 1967, 1968, 1972, 4.3 Observe padder safety. Ensure ade weight. Whenever possible, the wet 1981, 2009; reaffirmed 1975, 1978, quate guard at the nip point. Normal safe weight should be 2.5-3.0 times the dry 1989, 2007; editorially revised 1983, guards on pad should not be removed. weight. 1985, 1994, 2001, 2005, 2008; editori 8.3 Place the test specimen between ally revised and reaffirmed 1986, 1991, glass or plastic plates and insert in the 5, Apparatus and Materials (see 12.1) 1997, 2002. Technically equivalent to specimen unit of the perspiration tester. IS0 105-E01. 5.1 Perspiration tester (plastic or glass Adjust the perspiration tester to produce a plates are available with the equipment) pressure of 4.5 kg (10.0 lb) on the test (see 12.2). specimen (see 12.2). 1. Purpose and Scope 5.2 Drying oven onvection. 8.4 Heat the loaded specimen unit in an 5.3 Multifiber test fabrics (8 mm [0,33 oven at 38 ± I°C (100 ± 2°F) for 18 h. I.l This test method is designed to