基于ANSYS的框架砌体填充墙温度应力分析.pdf

Hans Journal of Civil Engineering 土木工程, 2016, 5(3), 68-73 Published Online May 2016 in Hans. /journal/hjce /10.12677/hjce.2016.53009 Analysis of Temperature Stress of Filled Walls in Framed Structures Based on ANSYS Hejiang Hu College of Civil Engineering, Tongji University, Shanghai th th th Received: Apr. 28 , 2016; accepted: May 17 , 2016; published: May 20 , 2016 Copyright © 2016 by author and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract The filled wall has great influence on the bearing capacity, rigidity and deformation properties of framed structures. In the application, the cracking problem of masonry filled walls in framed structures is quite serious, and one of the main reasons is the temperature stress. This paper conducted the simulation analysis of a simple framed structure with filled walls through ANSYS software, then observed the change rule of the maximum displacement, the maximum first prin- cipal stress and the average wall stress by changing the span, window area of the filled wall and setting up structural measures (structural column or ledge beam), in order to search for measures of reducing temperature stress and supply the technical support for engineering. Keywords Numerical Simulation, Temperature Stress, Filled Wall, Framed Structure, Temperature Displacement 基于ANSYS的框架砌体填充墙温度应力分析 胡合江 同济大学土木工程学院，上海 收稿日期：2016年4月28 日；录用日期：2016年5月17 日；发布日期：2016年5月20 日 文章引用: 胡合江. 基于ANSYS 的框架砌体填充墙温度应力分析[J]. 土木工程, 2016, 5(3): 68-73. /10.12677/hjce.2016.53009