国际电子产品安规基准列表.doc

International Standards Category Vendor Title Version IPC-2221 Feb 1998, General Standard On Printed Board Design 1998 IPC-2222 Feb 1998, Sectional Design Standard For Rigid Organic Printed Board 1998 IPC-D-279 July 1996, Design Guidelines For Reliable Surface Mount Technology Printed Board Assemblies 1996 IPC-SM-782 Revision A Oct 1996, Surface Mount Design And Land Patten Stabdard 1996 Design Management JIS Standard JIS-K7104 (Methods for Comparison of Surface Roughness of Plastics) 2000 EMC Rajs Office ANSI STANDARD ANSI C63.4-1992 (Revision Of ANSI C63.2-1991) Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical And Electronic Equipment in the Range of 9kHz to 40Ghz 1994 1992 BSI STANDARD BS EN 50081-1, EMC-Generic Emission Standard Part 1. Residential, commerical and light industry 1992 BS EN 50082-1, EMC-Generic Immunity Standard Part 1. Residential, commerical and light industry 1992 BS EN 55022:1995, EN 55022:1994, CISPR 22:1993, Limits And Methods Of Measurement Of Radio Disturbance Characteristics Of Information Technology Equipment 93-95 BS EN 61000-3-2, IEC 1000-3-2, Limits For Harmonic Current Emission (I/P Current=16A) 1995 BS EN 61000-4-2, IEC 1000-4-2, Part 4. Testing and measurement techniques Section 4.2 Electrostatic Discharge immunity test-Basic EMC Publication 1995 BS EN 61000-4-3, EN 61000-4-3, Part 4. Testing and measurement techniques Section 3 Radiated, Radio-Frequency, Electromagnetic Field Immunity Test 1997 BS EN 61000-4-4, IEC 1000-4-4, Part 4. Testing and measurement techniques Section 4 Electrical fast transient.burst immunity test-Basic EMC publication 1995 BS EN 61000-4-5, IEC 1000-4-5, Part 4. Testing and measurement techniques Section 5 Surge immunity test 1995 EN 50082-1, BS EN 50082-1, EMC-Generic Immunity Standard Part 1. Residential, commerical and light industry 1998 CISPR CIS