重油催化装置控制系统技术改造.pdfVIP

学兔兔 炼油与化工 2016年第1期 REFINING AND CHEMICAL INDUSTRY 61 重油催化装置控制系统技术改造 王 琳 ，潘大龙 ，陆德惠 ，周 雷 (1．大庆石化公司炼油厂，黑龙江大庆16371 1；2．大庆石化公司机动设备处，黑龙江大庆163714) 摘要：某炼油厂重油催化装置原控制系统操作站部分组件已老化，系统机柜电源故障率高，I／0卡件 设备频繁出现故障。原装置联锁与工艺过程控制由装置DCS系统实现，机组联锁与机组过程控制 由ITCC系统实现。实施系统的技术改造后，DCS系统为装置连续控制系统，ESD设置独立的紧急 停车系统，ITCC系统为调速控制及防喘振控制系统。并利用机组喘振线实测技术实现TS3000控制 系统的喘振控制功能。 关键词：重催装置；控制系统；防喘振技术；喘振线辨识；验证算法 中图分类号：TP273 文献标识码：B 文章编号：1671-4962(2016)0l一0O6卜03 Technical transformation of control system of heavy oil catalytic cracking unit WangLin1,PanD ，LuDebug， D Ld (1．Daqing Petrochemical company oil refinery，Daqing 16371 1，China；2．Equipment＆utilities department，Daqing 163714，China) Abstract：Some components of the original control system operation station in the heavy oil catalytic cracking unit of an oil refinery had aged，the fault rate of system cabinet power source was high，and I／O card equipment broke down frequently． The original interlock and process control of the unit was realized by DCS system，and the machine unit interlock and process control was realized by ITCC system．After technical transformation of the systems，DCS system is used as the continuous control system of the unit，ESD is set up an independent emergency shutdown system，and ITCC system is used as speed governing control and anti—surge control system，and machine unit surge line’S actual measurement technique is used to realize the surge control function of the TS3000 control system． Keywords：heavy oil catalytic cracking unit；control system；anti—surge technique；surge line recognition；verification algorithm 某炼油厂二重催装置投产于2000年5