无线接入成功率介绍及案例精选.pptxVIP

JUAN KANG reviewer: Eric Wang AA ;RRC Connection SETUP Process ;The main counters for this scenario are the following: ;E-RAB Setup Process ;ErabEstabSuccRate= (pmErabEstabSuccInit+pmErabEstabSuccAdded)/ (pmErabEstabAttInit+pmErabEstabAttAdded)*100% The main counters for this scenario are the following: ;Radio access success rate analysis steps ; Check alarm cell status LinkFailure , PowerFailure , ServiceUnavailable , VswrOverThreshold , Network Synch Time from GPS Missing ect alarm can affect network KPI Sleeping cell -----How to find the sleeping cell Check PM counters.? Massive amount of msg3 (pmRrcConnEstabAtt and pmRrcConnEstabAttReatt) and pmRrcConnEstabSucc=0 after successive S1 Connection failure events Check transport Check UL interference pmRadioRecInterferencePwr ( pmRadioRecInterferencePwr and pmRadioRecInterferencePwrPrb ) pmRadioRecInterferencePwrPucch ;Parameters consistency check Subframeassignment , specialsubframepattern , timeoffset ，cellbarred qRxlevmin , confOutputPower noOfPucchSrUsers , pdcchCfiMode , noOfPucchCqiUsers maxNrOfPucchPrbsPerTtiAndBbm8Rx( SC 961) maxNrOfPucchPrbsPerTtiAndBbm2Rx(SC959) T300 , T302，tRrcConnectionSetup Analysis PM counters , CTR MR pmRrcConnEstabAtt , pmRrcConnEstabSucc , pmErabEstabAttAdded , pmErabEstabAttInit , pmErabEstabSuccAdded , pmErabEstabSuccInit pmRrcConnEstabFailHighLoad , pmRrcConnEstabFailOverload , pmRrcConnEstabFailLic Use Xnow analysis CTR and MR verify coverage ,SIM, UE, eNB or MME parameter issu ;;;Case study2:;Case study2:;Case study3:;After enlarge the capacity of the cell , the blocking problem was solved and the Radio Access Success Rate returned to normal . ;Parameters Optimization ;Load balance The feature distributes traffic load between inter-frequency (LTE) cells that cover the same geographical area . Users in connected mode are distributed by load triggered inter-frequency handovers. ;cell confi