CC-powercableNYCWY-810.PDFVIP

CC-power cable NYCWY-810 0,6/1kV ，带屏蔽 ConCab kabel Mainhardt 810 2x10/10 NYCWY 应用领域 CC-power cable NYCWY-810 主要用于供电网络的铺设，以及在干燥和潮湿的室内使用，以及砖块和混凝土中使用，但电缆不能被 摇动、震动或在受压力被压缩的混凝土中使用。该电缆可以铺设在水中。其抗紫外线，在紫外线辐射中稳定。另外，该电缆适用 于有机械保护要求的区域以及要求不受接触电压影响的区域。其同心铜丝导体用作屏蔽，并且可以用作中性导体(N) 或者保护导体 (PE/PEN) ，但不能用作室外导体。 application The CC-power cable NYCWY-810 is designed to be laid in power supply networks over, on, inside and under plaster in dry, damp and wet rooms as well as in brickwork and in concrete with the exception of cabling in shaken, vibrated and compressed concrete. This cable is suitable to be laid under water. It is stable to UV radiation. Furthermore, this cable is ideal to be used where increased mechanical protection is required resp. protection against touch voltage. The concentric ceander-copper conductor serves as a shield and can be used as a neutral conductor (N) or protective conductor (PE/PEN) but not as an outside conductor. 构造 实心或多芯多股裸铜丝绞合，PVC 芯线绝缘，芯线颜色符合DIN VDE 0293 第308 部分标准。PVC 填充内护套，波形同心裸铜丝屏 蔽带铜箔胶带包覆，PVC 外护套，阻燃和自熄 ( 符合 DIN EN 60332-1-2 VDE 0482 第 332-1-2:2005-06 部分标准) 。外护套颜色 为黑色。 construction Bare, solid or multiple strands of copper wire, PVC core insulation, core colours acc. to DIN VDE 0293 part 308. PVC filling inner sheath, bare concentric ceander copper wire shield with copper tape PVC outer sheath, flame retardant and self- extinguishing (acc. to DIN EN 60332-1-2 VDE 0482 part 332-1-2:2005-06). Colour black. 技术数据 / technical data 额定电压 / rated voltage: 0,6/1kV 测试电压 / test voltage: 4000 V 导体绞合方式 / conductor stranding: 实心或多芯铜丝绞合/ solid or multiple copper strands, 符合 / acc. to DIN VDE 0295, 1 类标准 / class 1 绝缘阻抗 / insulation resistance: