厂区建筑模板支撑系统的材料和要求.docVIP

厂区建筑模板支撑系统的材料和要求 厂区建筑模板支撑系统的材料和要求提要：钢管必须有有效的产品质量合格证书、钢管材质检验报告、生产厂家资质证书和生产许可证 精品源自请示 厂区建筑模板支撑系统的材料和要求 1.模板支撑系统的材料选用： （1）采用φ48mm×碳素结构钢制造的低压流体输送焊接钢管为满堂模板支架的立柱，纵、横向扫地杆，纵、横向水平杆、剪刀斜撑的材料。 （2）采用kTH330-08可锻铸铁制作的直角扣件、对接扣件、旋转扣件为支架钢管的连接和固定件。 （3）采用18mm厚胶合板和50mm×80mm方木为模板制作材料。 （4）采用300mm×300mm×100mm木块为立柱底部垫块。 2.模板支撑系统的材料要求： （1）钢管： A．钢管必须有有效的产品质量合格证书、钢管材质检验报告、生产厂家资质证书和生产许可证。 B．钢管两端面必须平整。 c．钢管外观表面光滑、无裂纹、分层、压痕、划道和硬弯。 D．钢管无锈蚀，有防锈处理。 E．不得使用用电焊对接的钢管和中间有孔眼的钢管。 （2）扣件： A．扣件必须有有效的产品质量合格证书、扣件材质检验报告，生产厂家资质证书和生产许可证。 B．扣件的机械性能不低于kTH330-08可锻铸铁的标准。 c．扣件不得有裂纹、气孔；不得有缩松、砂眼和其它影响质量的铸造缺陷。 D．扣件与钢管的贴合必须严格整形，保证与钢管扣紧时接触良好。 E．扣件活动部位应能灵活转动，旋转扣件的两旋转面间隙应小于1mm。 F．当扣件夹紧时，开口处的最小距离应不小于5mm。 G．扣件螺栓拧紧扭力矩达时，扣件不得破坏。 H．扣件表面应有防锈处理。 （3）模板材料：18mm胶合板在此无要求。50mm×80mm方木中间不得有节疤、裂纹。 （4）底座：梁立杆底部垫300*300*100木垫块，木垫块不得有裂纹。 精品源自请示 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and t