华文文理综合教学楼建筑设计及计算书_毕设论文.doc

摘要 本综合教学楼共5层，层高3.9m，建筑总高度19.5米。建筑面积约14118m2。采用钢筋混凝土框架结构，抗震设防烈度为度抗震等级为级建筑设计部分，结构设计部分，根据建筑设计工艺使用要求材料供应情况场地地质条件等确定结构布置方案，然后选取一榀典型框架进行设计计算。在明确计算简图的前提下，进一步确定框架承受的荷载，包括恒载、屋面活载，在此基础上进行框架内力计算（采用D值法计算风荷载作用下的内力，采用弯矩二次分配法计算竖向荷载作用下内力）内力组合梁、柱和基础等构件的配筋计算在上述工作的基础上，采用制图软件AutoCAD绘制了建筑结构施工图。Abstract The comprehensive teaching building has 5 floors, floor high 3.9 meters building a total height of19.5 meters,.the building area of about 14118 m2. with reinforced concrete frame structure, seismic grade 3, seismic fortification intensity is 7 degrees, the whole design including architecture design and structure design two parts. Architectural design part, according to the characteristics of buildings and asked to determine the shape of the buildings, fortification intensity and seismic grade to determine the structure of buildings, then to column grid layout, building good column grid layout for the size of the room is decorated after, and then according to the functional partition room division, finally to detail of the building, so that the buildings reach applicable, security, economic, beautiful. Structure design part, firstly according to the architectural design, process, materials supply and requirements for the use of the site geological conditions determine the layout of the structure, and then selects a pin typical framework design. In the explicit calculation diagram under the premise, further determining the frame under load, including dead load, live load house ( floor) surface, on the basis of calculation of internal forces of frame ( the D value method to calculate the wind load, the moment two methods of distribution to calculate vertical load under the action of internal force, internal force ) combination, beam, column and foundation member reinforcement calculation and wind load under the lateral displacement calculation. In addition, the structure scheme of the design of stair.Ladder section of oblique beam, and completed the step plate flat pallet, platform beam co