BSOA-M4-16螺纹柱资料.pdf

S E L F - C L I N C H I N G S TA N D O F F S SELF-CLINCHING STANDOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes – and become permanently mounted in the thin sheet. PEM brand standoffs are installed with their heads flush with one surface of the mounting sheet. When blind-threaded types are used, outer sheet surfaces are not only flush, but closed as well. Unthreaded standoffs are also available for spacing multi-panel assemblies. Types TSO, TSOS, and TSOA self-clinching threaded standoffs provide permanent threads in sheets as thin as .025” / 0.63 mm. Always look for the “One or Two Groove” Types SO4 and BSO4 standoffs are for installation into stainless steel trademarks to be sure you are sheets as thin as .040” / 1.02 mm. getting genuine PEM brand standoffs PEM self-clinching standoffs are also available on special order in non- heat treated carbon steel as type SON (thru-hole threaded) or BSON (blind