毕业设计单面钻框架端孔组合机床的总体设计研讨.docVIP

编号NO： 河北农业大学毕业设计 设计题目 单面钻框架端孔组合机床的总体设计 学生姓名 学号 成绩 学院 机电工程 专业班级 机械设计制造及其自动化 指导教师姓名 __ __ 指导教师职称 教授 材料目录： 1、任务书 （ ）份 2、进度计划表 （ ）份 3、文献综述 （ ）份 4、翻译文章及外文原文 （ ）份 5、阶段检查表 （ ）份 6、指导教师评阅书 （ ）份 7、专家评阅书 （ ）份 8、答辩评分表 （ ）份 9、答辩记录表 （ ）份 10、设计说明书 （ ）份 11、其它材料： 摘要： 随着自动化生产能力的提高，现代工厂中出现需要 With automatic production capability is improved, the modern factories in need of modular machine tool, the combination of more occasions based on general parts, match with workpiece specific shape and process design of special components and fixtures, composed of semi-automatic or automatic special machine. It usually adopts the multiaxial, knife, processes, and multi-faceted or multistage and processing, production efficiency than general machine high several times or more. Due to the common parts have standard series, can according to the combined flexible configuration, can shorten the cycle of design and manufacture. Therefore, the combination machine has the advantages of low cost and high efficiency, in large, mass production is widely used, and the automatic production line can be used to composition. The topic for the trapezoidal frame on the surface of 25X φ 11 hole drilling this specific process to design a special horizontal combination machine tool. In this design, all the standard parts selection based on the carefully data calculation, and according to the characteristics of the structure by processing components, precision machining parts size, surface roughness, and the localization way, clamping technology and processing process using tools, cutting dosages as productivity, the structure design of reasonable combined machine tool. Keywords：Combination machine tool, cutting parameters, process flow, drilling 目录 1 绪论 1 1.1 国内外组合机床的发展现状 1 1.2 机床设计的内容和要求 2 1.2.