平创车使用安全技术交底（三）.doc

平创车使用安全技术交底（三） 平创车使用安全技术交底（三）提要：操作时左手压住木料，右手均匀推进，不要猛推、猛拉，切勿将手指按于木料侧面。刨料时，先刨大面当作标准面，然后再刨小面 建设集团有限公司 平创车使用安全技术交底 1.手压刨必须有安全装置，并在操作前检查机械各部件及安全防护装置是否松动或失灵，并检查刨刃锋利程度及吃刀深度，经试车1~3米后，才能进行正式工作，如刨刃已钝，应及时调换。 2.吃刀深度一般调为1~2mm。 3.操作时左手压住木料，右手均匀推进，不要猛推、猛拉，切勿将手指按于木料侧面。刨料时，先刨大面当作标准面，然后再刨小面。 4.在刨较短，较薄的木料时，应用推板去推压木料。 5.长度不足400mm，或薄且窄的小料不得上手压刨。 6.两人同时操作时，须待料推过刨刃150mm以外，下手方可接拖。 7.操作人员衣袖要扎紧，不准戴手套。 8.应严格按规定选用熔丝，严禁随意改用代用品。 9.禁止在机械上装倒顺开关。 10.补充交底内容： 工程名称：交底人：单位：班组： 年 月 日 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological quality and image quality. The formation of excellent moral education curriculum system and management system, the construction of school. The society, family moral education network, to achieve full member education, environment education, education serv