热处理安全操作规程(四).doc

热处理安全操作规程(四) 热处理安全操作规程提要：加热装置接线、绑扎时，应防止绑扎铁丝切入加热带（块）造成短路。接线头应用专用接线头，不得随意用它物替代 资料来自 1、操作人员必须具有热处理资格证，辅助人员必须具备电气方面的基本知识。 2、接触保温棉的人员，必须穿戴好防护用品，衣袖、裤脚、领口要扎紧。 3、热处理用电源、输出电线必须严格按照设计要求选用，满足用电需求。 4、加热装置接线、绑扎时，应防止绑扎铁丝切入加热带（块）造成短路。接线头应用专用接线头，不得随意用它物替代。 5、加热时，应按热处理方案进行加热和降温，加、降温过程中不得用手直接接触加热部分。 6、加热过程中需重新包扎时，必须待已加热的部位冷却至常温时方可拆除包扎。 7、包扎完成后，对所用输电线应进行检查，无破损、裸露等漏电可能后方可送电加热。 8、在热处理过程中，加热件附近不得存放易燃、可燃物品；禁止用易燃、可燃物作临时支撑。并应配备消防器材。 9、正热处理的物件应设置警示标志，防止接触。 10、热处理的保温品及其废料必须及时收集，放回指定堆放点。 11、在作业过程中出现如过敏，立即就医。 12、对大型设备进行热处理时，要预先对起内部热影响区进行检查，防止有可燃物存在。同时，对大型设备的出入口进行封闭，并作好警戒，防止他人误入。 13、大型设备整体热处理时，要仔细检查设备内外存在的可燃物、燃料气控制装置、点火装置及有关检测设备，防止出现爆炸性混合气体及中间熄火，引发事故。 资料来自 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological quality and image quality. The formation of excellent moral education curri