中英文朗读文档014092705.docVIP

1H414020 建筑电气工程安装技术 1 h414020 building electrical engineering installation technology 1H414021 建筑电气工程施工程序 1 h414021 construction program of electrical engineering 二、建筑电气工程施工程序 Second, the construction program of electrical engineering 1．变配电工程施工程序 1. The distribution project construction program (1)成套配电柜（开关柜）的安装顺序： (1) the installation of complete sets of power distribution cabinet (switchgear) order: 开箱检查→二次搬运→安装固定→母线安装→二次小线连接→试验调整→送电运行验收。 The crates to secondary handling, installation of fixed - bus bar installation - second string cable connection to test adjustment, sending acceptance run. 2．供电干线及室内配线施工程序 2. Supply main and indoor wiring construction procedures (2)电缆敷设施工程序： (2) the cable laying construction procedures: 电缆验收→电缆搬运→电缆绝缘测定→电缆盘架设电缆敷设→挂标志→质量验收。 Acceptance - cable handling - determination of cable insulation cable to cable laying cable erection, hanging signs and quality acceptance. (4)暗管敷设施工程序：测量定位→导管预埋→导管连接固定→接地跨接→刷漆。 (4) dark pipe laying construction procedures: measurement positioning - catheter embedded - catheter connecting the fixed - ground jumper - brush paint. (5)管内穿线施工程序：选择导线→清管→穿引线→放线及断线→导线与引线的绑扎→放护圈→穿导线→导线并头→压接压接帽→线路检查→绝缘测试。 (5) pipe stringing construction program: select conductor to pigging, wear leads to pay-off and break line, conductor and the binding of lead to put a retainer, wear a wire to wire and head to the pressure of by pressure cap - line inspection, insulation test. 3．电气动力工程的施工程序 3. Electric power engineering construction procedures (1)明装动力配电箱的施工程序： (1) with the power distribution box construction procedures: 支架制作安装→配电箱安装固定→导线连接→送电前检查→送电运行。 Stents installed production - distribution box fixed - wire connection - power check and sending before operation. 4．电气照明工程的施工程序 4. Electric lighting engineering construction procedures (2)照明灯具的施工程序： (2) lighting lamps and lanterns of construction procedures: 灯具开箱检查→灯具组装→灯具安装接线→送电前的检查→送电运行。 Lamps and lanterns of the crates to assembly and installation of lamps and lanterns