原位法制备TiCp／AZ91复合材料及摩擦磨损性能的研究.pdfVIP

维普资讯 学兔兔 Ju1．2008 VOI．57 NO．7 ·667 · {复合材料 }●_、● ●^ ‘- ●‘■ 、● ■ ^‘ ’ ●、 ■、， ●■ ■ ●r■ ，’，● ’ _ 原位法制备TiCp／AZ91复合材料及 摩擦磨损性能的研究 王 彬，滕新营，张文洁，神祥博，耿浩然 (济南大学材料科学与工程学院，山东济南250022) 摘要：以A1．Ti．C为反应体系，采用热爆法在AZ91合金熔体中合成了TiC颗粒并对复合材料的摩擦磨损性能进行研究。 结果表明，在750℃温度下，A1．Ti．C体系中Al含量为40％时，原位反应进行得最充分，生成的TiC颗粒细小，在复合材 料中分布均匀。复合材料试样的摩擦磨损研究表明，当TiC含量在0‰ 5％时，复合材料的耐磨性能随着TiC含量的增加 显著提高，磨损机理由AZ91基体的粘着磨损逐渐转变为磨粒磨损。 关键词：镁基复合材料；原位反应；摩擦磨损 中图分类号：TG146．1+3；TB333 文献标识码：A 文章编号：1001—4977(2008)07—0667—04 Research on I n—situ Fabrication and Wear Properties of TiCp／AZ91 Composites WANG Bin，TENG Xin．ying，ZHANG Wen-jie，SHEN Xiang．bo，GENG Hao．ran (SchooI of Materials Science and Engineering，University of Jinan，Jinan 250022，Shandong，China) Abstract：The TiC particulate reinforced AZ91 alloy matrix composites was fabricated using in—situ reaction in melt of magnesium alloy with AI．T__C system and its wear properties were also investigated．The results showed that reactions were SU仟icient with 40 wt％ aIuminum in AI．T．_C system at 750℃ ．TiC particulate was smalI and distributed homogeneously in the matrix of composites．The results of dry friction experiments indicated that the wear resistances of the composites with 0 wt％．5 wt％ TiC were improved obviously and the friction mechanism changed fr0m c0naIutinati0n abrasion in AZ91 alloy to grain abrasion with increasing of the TiC content． Key words：magnesium matrix composites；in—situ reaction；friction and wear behavior 原位内生颗粒增强金属基复合材料是在基体内通