M5C英文说明书.doc

M5C HMI Controller Software Manual TKC Version TAIWAN KINKI MACHINERY CO., LTD NO.180 LANE 128, SAN MIN RD., LU CHOW CITY TAIPEI HSIEH TAIWAN Tel：886-2ax：886-2-mail：kinki@ms7.hinet.net Ningbo, Mainland China Tel：86-574ax：86-574Dong-goan, Mainland China Tel：86-769ax：86-769Preface This is the controller software manual for the TECHMATION M5C TKC version HMI. This consists of 2 parts: The Operation Manual and the Reference Manual. Please refer to the Operation Manual for exact instruction on how to set up and program the machine’s clamping unit, injection unit and production monitor. For a detailed explanation if the HMI panel and panel keys as well as for the various HMI display screen please refer to the diagram operation manual. Warning: For safety precautions and general machine operation and maintenance you must refer to the machine manufacture’s manual. This is essential to avoid serious injury to the machines operator and to prevent damage to the machine. Changing the machines setup and settings without proper care and knowledge Liability: Techmation assumes no liability in any form for machine operation in connection with the use of this manual. It is your responsibility to ensure safe machine operations. Never operate machine without proper training and instructions. Read both manuals first (the machine manufacture’s manual and Techmation’s Controller Software Manual) before attempting any operation of the machine. Please note that the information in this manual is not subject to change without any notice. For any further information, spare parts services, documentation product updates, general inquires etc. please contact us at the following address: TAIWAN KINKI MACHINERY CO., LTD No. 180 Lane 128, San Min Rd., Lu Chow City, Taipei Hsieh Taiwan R.O.C. Phone: +886-2Fax: +886-2E-mail: kinki@ms7.hinet.net We hope that you will find this manual helpful for your machine op