AQ7001-2007 机械压力机平安应用请求(国外英文资料).docVIP

AQ7001-2007 机械压力机安全使用要求(国外英文资料) Aq7001-2007 mechanical press safety requirements Safety requirements for the use of mechanical press Since?? The 2007-4-1?? The execution To discuss preface 1 scope Normative reference files 3 terms and definitions General safety requirement of mechanical press Rigid clutch press Friction clutch press User responsibility Safe use 9 safety management preface To regulate the safety of mechanical press is used to prevent and reduce accidents, according to the regulations on safety production laws and regulations and standards, these standards are formulated. This standard shall be submitted by the state administration of production supervision and administration. This standard is made up by the national committee on standardization of safe production. The standard drafting unit: the national forging press quality supervision inspection center and Shanghai shengan brake manufacturing co., LTD. The main drafters of this standard: guo and feng jianping. Mechanical press safety requirement 1 scope This standard specifies the safety requirements of mechanical press. This standard applies to the mechanical press that is being used in the production process. Normative reference files The provisions of the following documents shall be the provisions of this standard through the reference of this standard. Every note date reference documents, its all subsequent modification single (not including errata content) or revised edition are not applicable to this standard, however, according to the agreement of the parties of this standard are encouraged to study whether can use the latest version of these documents. The latest version of an undated reference file applies to this standard. GB 4584 press for light safety device technical conditions GB 5226.1 mechanical safety mechanical electrical equipment part l: general technical conditions (IEC 60204-1:20, IDT) GB/T 8176-1997 stamping shop safety production GB13887-1992 cold stamping safety procedur