LDZ200锚杆拉力计仿单(国外英文资料).docVIP

LDZ200锚杆拉力计说明书(国外英文资料) The LDZ/S is used in the instruction manual Middle coal group - cheng dongmeiA, use It is used for testing and judging the strength of anchor rod, anchoring force and anchor quality. It is widely used in coal mine anchorage, defence, transportation, etc. The anchor tension meter of coal mine is small, light weight, easy to carry, easy to operate, safe and reliable. Second, model meaning L, D, Z/S, 200 Main parameters: rated tensile strength, unit 1000 cattle (KN) Second feature codename: Z pointer/S digital display First feature codename: D oil circuit Product category codename: anchor tension meter Technical parameters Table 1 basic performance parameters model project LDZ/S - 100. LDZ/S - 200. LDZ/S - 300. LDZ/S - 500. The whole machine Rated tension (KN) 100 200 300 500 Jack pressure (Mpa) 60 60 60 60 The diameter (mm) for the anchorage. ￠14 ~ ￠24 ￠16 ~ ￠24 ￠18 ~ 30 ￠ ￠20 ~ 30 ￠ The tension value is accurate Degree of deviation + / - 0.5 + / - 0.5 + / - 0.5 + / - 0.5 Tension meter Type Z pointer pointer pointer pointer Type s. Digital display Digital display Digital display Digital display range 0 ~ 60 mpa 0 ~ 60 mpa 0 ~ 60 mpa 0 ~ 60 mpa Precision grade 1.5 1.5 1.5 1.5 The hollow jack The cylinder diameter (mm) 55 75 95 120 Stroke (mm) 60 60 60 60 Center aperture (mm) 22 26 32 36 Heavy machine (kg) 10 15 20 23 Piston bearing area cm? 19 35 55 93 Fluid pressure Pump station Rated work pressure (((Mpa) 63 63 63 63 Fuel tank effective volume (L) 3 3 3 3 System rating (mL/time) The low pressure 12.5 12.5 12.5 12.5 High pressure 2.3 2.3 2.3 2.3 type Single exit, manual type Single exit, manual type Single exit, manual type Single exit, manual type Hand force (N) 500 or less 500 or less 500 or less 500 or less Heavy machine (kg) 8 8 8 8 (1) Fourth, structural principle Figure 1, the anchor drawing of the anchor bar Figure 2. The general drawing of the jacks 1, the outer cylinder 2, inner cylinder body 3, the piston 4, compression s