井下工艺试题(初级)(国外英文资料).docVIP

井下工艺试题(初级)(国外英文资料) The underground process test (primary) 180 A well control is short for the implementation of A gas well (A). A, pressure control B, oil and gas control C, formation control Early detection, (A), early treatment. A, early shut-in B, early kill C, early choke When the pressure of the well bottom pressure (C) is under pressure, the phenomenon of the wellhead return of the fluid is greater than the amount of fluid or the automatic outflow of the well after the pump stops. A, is greater than the B, is equal to the C, less than According to the position of the blowout fluid, the spray can be divided into two kinds: ground well blowout and (B). A, drilling blowout B, underground blowout C, the pipe string blowout (C) a well control technique that USES hydrostatic pressure to balance the pressure of the strata. A, level 3 well control B, the secondary well control C, level of well control The well control technique is divided into (B) level well control. A, 2 B, three C, four The only correct operation to prevent the blowout is (A). A, in time to close the well. B, make decision according to the working conditions. C, circular observation according to the situation shut-in. The flow rate (C), the more convenient the shut-in control and the safer. A, it doesnt matter B, the more C, the less The secondary well control refers to the well control technology which is balanced by the timely shut-in and pressure well after the overflow or blowout. A, the reservoir pressure B, borehole pressure C, formation pressure, Shuai is A well control technique that USES (A) and the well head back pressure to balance the pressure of the strata. A, hydrostatic pressure B, the bottom hole pressure C, stand pipe pressure The root cause of the overflow is the pressure of the bottom pressure (B). A, is greater than the B, less than C, is equal to the The perforation completion method includes the casing perforation completion and (A) perforation completion. A, tail pipe B, tubi