公路水运试验检测继承教导 混凝土力学性能检测-自测-谜底(国外英文资料).docVIP

公路水运试验检测继续教育 混凝土力学性能检测-自测-答案(国外英文资料) Question 1 The accuracy of the dial is not lower than () mm A. 0.01 B. 0.001 C. 0.0001 D. 0.1 Answer: B Your answer: B Subject score: 9 Score: 9.0 Remark: ? Second question The initial load value of 0.5 MPa for the added charge is F0, which keeps the constant load of 60 and the readings of the two deformation gauges on both sides of the (s) in the future (s). Epsilon left 0, epsilon right 0. A. 20 30 B. 40 C. D. 60 Answer: B Your answer: B Subject score: 9 Score: 9.0 Remark: ? The third question The kN/s () kN/s () kN/s () kN/s () kN/s (kN/s) is the same as the kN/s (kN/s) A. 0.15 ~ 0.25 B. 0.15 ~ 0.15 C. 0.15 ~ 0.35 D. 0.25 ~ 0.25 Answer: A, Your answer: A, Subject score: 9 Score: 9.0 Remark: ? Number 4 The result is accurate to () MPa. A. 0.1 1 B. 10 C. 100 D. Answer: D Your answer: D Subject score: 9 Score: 9.0 Remark: ? 5 The following are some of the options for the correct test of compressive elastic modulus A. test shall be carried out under the condition of 23 ℃ + 2 ℃ The elastic modulus of the compression strength of the concrete is applied to the compressive strength of the shaft The surface of the section of the central l / 3 section shall not be more than 5mm in diameter and more than 1mm in depth D. the result is accurate to 100MPa. E. The arithmetic mean of the three test results. If the cycle as a root and cycle before the difference between the axial compressive strength and more than 10% of the latter, the elastic modulus value according to the arithmetic mean of the two specimens test of computing, such as two root specimen test results beyond the rules, the test result is invalid. Answer: B, D Your answer: B, D Subject score: 12 Score: 12.0 Remark: ? Number 6 The following are some of the choices of the concrete resistance bending modulus test A. test shall be carried out under the condition of 23 ℃ + 2 ℃ For each group of six samples of the same condition, three were used to measure the strength of the bendi