冯米斯应力(国外英文资料).docVIP

冯米斯应力(国外英文资料) Von Mises (von Mises stress, stress cloud). Von mise should try to evaluate the stress distribution. Catia automatically generates a palette that colors from blue to red, indicating a gradual increase in stress. When the mouse points to the node, the von mith stress value of the node is displayed. The von Mises yield criterion was von Mises proposed a yield criterion in 1913. The content is: when the equivalent stress state of the stress state reaches a fixed value independent of the state of the stress state, the material will yield. When the material is in a plastic state, the equivalent stress is always a constant value. Equivalent sigma = (1/2 (1 - sigma sigma 2) ^ 2 + 2 - sigma (sigma 3) ^ 2 + (3 - sigma sigma 1) ^ 2) ^ (1/2) see the plasticity mechanics The von mises stress is an equivalent stress, which is the equivalent stress of the fourth strength theory. Von mises stress is a comprehensive concept, considering the first and second third major stress, which can be used to evaluate fatigue, damage, etc. There is a strain analysis based on stress analysis. The von mises stress (VMS) is actually a stress level criterion. We think that for a certain material, it has a stress level, which corresponds to the corresponding yield point. When the material is stimulated by an external force, if the stress (VMS) is greater than this, then we think the material is likely to yield. In FEA, VMS are based on principal stress. The Von Mises stress and the Von Mises yield criterion are used in isotropic materials, which are derived from the first invariant of the stress tensor. If there is a shortage of data in biomechanical calculations to approximate material parameters, it is possible to use the VON stress in this case. VMS are the fourth yield theory of material mechanics, mainly for plastic materials, mainly for fatigue effect. Maximum stress, the maximum strain is for brittle materials. In my mind, you can look at the four strong theories of material m