16秋北航《修建结构检测判定与加固》在线功课二(国外英文资料).docVIP

16秋北航《建筑结构检测鉴定与加固》在线作业二(国外英文资料) Beihang construction inspection appraisal and strengthening online work 2 One, single topic (10 questions, 40 points). There are many kinds of moisture-proof measures. The basement doesnt use (). A. indoor wall plaster and then brush cold base oil two B. cement mortar and mortar C. set horizontal moisture-proof layer Do the vertical moisture-proof layer Correct answer: The correct and reasonable spacing of the expansion joints in the same area is considered. The spacing of the retaining wall and the basement wall structure is larger than that of other structures due to the protection of the earth The assembly structure is smaller than the current structure due to its total deviation C. shear wall structural stiffness large expansion joint space is larger than frame structure D. the structure of the frame is less than 8 meters high, and the shear wall structure is suitable to reduce the spacing of the expansion joint Correct answer: The contribution to the shear strength of the wall is not much greater than the original wall shear strength (). A. 10% B. 20% 30% C. D. 40% Correct answer: The amount of carbon in steel for civil engineering is not greater than (). A. 0.2% B. 0.4% 0.6% C. D. 0.8% Correct answer: In general, the foundation of force reinforcement is (). Flexible foundation Box foundation Rigid foundation Raft foundation Correct answer: The loss mainly refers to the destruction of the construction structure (). A. in the past B. the cumulative C. in the future D. the current Correct answer: When cracks appear in curved structures such as concrete beams,The load is often the limit load (). A. 5% ~ 10% B. 10% ~ 15% C. 15% ~ 25% D. 25% ~ 30% Correct answer: In the bending component, the tensile strength of the tensile strength is reached, and the boundary concrete of the compression zone reaches the extreme pressure strain at the same time, it is called (). A. Hyperbar damage Less damage Limit damage Correct answer: The rating