ANSYS高级工程无限元剖析典范精选 螺栓敕令流(国外英文资料).docVIP

ANSYS高级工程有限元分析范例精选 螺栓命令流(国外英文资料) FINISH / CLEAR, START ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ! Set the basic structure parameters (parameters can be changed by different structures) ! The unit of parameters is: force, N; Length, mm; Modulus of elasticity, the N/mm ^ 2; Density, tons/mm ^ 3 ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * SET, RAD_I, 1250/2! Within the main shaft radius * S