NI-DAQmx 和DAQ 设备安装指南.pdfVIP

DAQ GETTING STARTED Read Me First: NI-DAQmx™ and DAQ Device Installation Guide This document contains instructions in English, French, German, Japanese, Korean, and Simplified Chinese. Ce document contient des instructions en anglais, français, allemand, japonais, coréen et chinois simplifié. Dieses Dokument enthält Anweisungen in Englisch, Französisch, Deutsch, Japanisch, Koreanisch und vereinfachtem Chinesisch. , , , , , ( ) . Install your software before installing new hardware. Install Application Software Install NI application software, such as NI LabVIEW, or another application development environment (ADE), such as ANSI C or Visual Basic .NET. Refer to the NI-DAQmx Readme on the software media for supported application software and ADE versions. Back up any applications before upgrading your software or modifying the application. Install NI-DAQmx Install NI-DAQmx driver software before installing new hardware devices so Windows can detect them. 1. Insert the software media. If the NI-DAQmx installer does not open automatically, select Start»Run. Enter x :\autorun.exe, where x is the drive letter. Complete the instructions. 2. Register your NI hardware online at /register when prompted. 3. The last dialog box opens with the following options. • Restart Later to install more NI software or documentation. If you are using a MXI-3 link from a PC to control a PXI chassis, exit and install the MXI-3 software, available at /downloads, before using the DAQ device. • Shut Down or Restart if you are ready to install your device. • Restart if you are using a system running the LabVIEW Real-Time Module. Download NI-DAQmx to the target using MAX. Refer to the Measurement Automation Explorer Remote Systems Help by selecting Help»Help Topics»Remote Systems in MAX.