支撑物缺位对真空玻璃应力和变形影响分析.pdfVIP

3童袋眷锵 阳回国曲 支撑扬缺位对真全放珞应h和 交形影响分析 中国建材检验认证集团股份有限公司 刘小根 万德、田 北京新立基真空玻璃技术有限公司 孙景春 唐健正 许威 摘 要:支撑物缺位(漏放)直接影响真空玻璃的安全可靠与耐久性应用。本文基于 ANSYS 有限元数值模拟，分析了真空 玻璃不同部位支撑物缺位及支撑物漏放数量对真空玻璃的玻璃基片弯曲应力和变形影响。结果表明，支撑物缺位后，只对缺位 部位周围的支撑物支挥力产生明显影响，同等条件下，中部缺位引起的玻璃基片弯曲应力和变形最大，其次为边部缺位，角部缺 位影响最小。提供了支撑物缺位对真空玻璃真空间隙层总厚度变化量的计算方法，并进行了试验验证。最后，给出了给定条件下 真空玻璃支撑物缺位的许可界定。 关键词:真空玻璃;支撑物缺位;应力和变形;支撑物缺位九许界定 Abstract: The absence (leak) of pillars affects the safety and durability of the vacuum glazing in application. In this work , the bending stress and deformation of the vacuum glazing due to absence of the pillars with difference absence type were analyzed by ANSYS finite element numerical simulation. The results show that the support force is influenced obvious only to those pillar百 around the absence pillar , under the same conditions , the bending stress and deformation is largestif pillar absence at the central place of the vacuum glazing , followed by absence at the edge and angle place. The calculation method of the overall variation in thickness of the vacuum layer of the vacuum glazing was given , and the results were verified by tested.Finally , the define to the allowable absence pillars numbers and place of the vacuum glazing were given under given conditions. Key words: vacuum glazing, absence of the pillar, stress and deformation, define to allowable absence pillars 1 前言 应力，造成真空坡璃在日后应用过程中破裂概率增大，严重 时甚至直接造成抽真空后支撑物缺位部位的两片玻璃相互 作为新一代具有优异节能功效的玻璃制品，真空玻璃的 接触或破裂。因此，对支撑物缺位检查是真空玻璃企业非常 应用范围越来越广泛地受到农业、制冷、建筑等行业的